Free tool

Duct Cleaning Price Calculator Australia | Rates by State

See what Australian duct cleaning pays per job: outlet count and systems set a published price in Australian dollars including GST, adjusted by state, with your margin checked against crew hours.

Your area
State or territory Prefills a typical labour cost for your state — fine-tune it below to your real numbers.
The house
Your costs and margin Optional — check what you keep at this price
Your costs
Profit settings

How these estimates are calculated

Place, currency and tax. Prices are for Australia, in AUD (A$). They include GST. Australian Consumer Law requires one all-inclusive price. The range is a national average. When you pick your state or territory, the calculator scales the labour share of the range by a local index from 0.85 to 1.11. The calculator does not quote below its minimum price, A$260 at the national average.

Where the range comes from. The market range for this job comes from prices published for Australia by businesses on their own price lists. We name these sources by type, not by company. We check the hourly rates against Fair Work award pay rates for cleaning, construction and plumbing. A trade's rate should sit well above what its workers earn, because it also pays for overhead, travel and insurance.

When we checked. We last checked these rates against their sources on 23 August 2026.

Market price and your price. "What pros charge" is the market range for the job you describe. Your own cost figures do not change it. The table under it, "Your costs at this price", uses your figures: time on the job, labour cost, materials, equipment, travel, fees and overhead. Profit is the market price without GST (10%) minus those costs, because GST is collected for the government, not earned.

Australian duct cleaning is the shortest job of the four markets that sell it — one and a half to three hours for a house against three and a half in North America — and the cheapest per outlet. The calculator above prices from the outlet count, because that is how both Australian sources price it.

How the calculator works

  1. Count every outlet. Supply outlets and returns both.
  2. Each extra system is a second setup, at A$150–A$300 and close to an hour.
  3. Add-ons are their own lines. Dryer vent, furnace, blower, coil.
  4. Your state. Prices are adjusted by a state labour-cost index, with an A$260 minimum under it. New South Wales carries the highest index, about 11% above the national average.
  5. Your economics. “Your costs and margin” works in crew hours and nets GST out before comparing price to cost.

Typical Australian duct cleaning prices in 2026

ItemPriceUnit
Outlet or return, labour includedA$25–A$40each
Additional outlet over the baseA$10each
Additional HVAC systemA$150–A$300each
Dryer ventA$80–A$160job
Furnace, blower or coilA$60–A$150unit
Antimicrobial foggingA$75–A$225system

By outlet count, one operator prices to 6 outlets at A$200–A$300, 7–10 at A$300–A$400 and 11 and up at A$400–A$600. Another starts at A$260 for five. Whole jobs run A$200–A$700 with a flat rate of A$300–A$500 most common. Minimum charge A$260. All figures include GST.

Where the Australian numbers are thin, said plainly

Two operators, both Melbourne. The per-outlet rate, the A$10 marginal outlet, the flat rate and the duration all come from Melbourne. Nothing was found for Sydney, Brisbane or Perth on this trade.

The advertised hourly does not fit its own jobs. A$50–A$100 an hour against jobs of A$200–A$700: the top of the rate at three hours reaches only the bottom of the job range. The same pattern appears in three of the four markets here, which is why this calculator prices from the count and treats the advertised hourly as the weaker reading.

The award is a floor, not a market wage. No Australian source publishes what a duct technician is paid, and no country has an occupation code for the trade. Your real labour cost is probably above the default.

The shortest duration of the four markets is one operator’s claim. One and a half to three hours against three and a half from an Ontario contractor’s published ladder. If Melbourne jobs really are that much faster, margins here are the best of the four; if the reading is optimistic, they are not.

Worked example

A large house with 22 outlets, two systems, two appliance units, a dryer vent and a long-overdue system. The typical quote lands at A$1,615 including GST (range A$1,315–A$1,915) for about 8.5 crew hours. About A$147 of it is GST, so A$1,468 stays with you. At the sample’s A$73 a crew hour, the job costs about A$885 with equipment, supplies, the drive and overhead. That leaves A$583, a 40% margin on the price without GST. The hours are the shortest of the four markets and they are one operator’s claim, so this margin is the least certain of the four. The “Fill with sample data” button loads this job.

What this calculator does not price

Commercial ventilation, a different standard and a different model. Mould remediation in the building. Inspection, because five sources across the markets give five incompatible levels. Quote those from your own records.

The calculator gives you the number. For typical rates and how to build a quote, read our US air duct cleaning pricing guide. Its rates are in US dollars.

Frequently asked questions

How much should I charge for duct cleaning in Australia?

Count the outlets. Published rates run A$25–A$40 per outlet in Melbourne, and one operator prices from A$260 for five outlets with each additional outlet adding A$10. Whole jobs run A$200–A$700 across the country, with a flat rate of A$300–A$500 most common. Every figure includes 10% GST.

Why do my prices have to include GST?

Section 48 of the Australian Consumer Law requires a single all-inclusive price to a consumer, so every figure on this page and in the calculator includes GST. Under A$75,000 of turnover you do not have to register for GST. If you register anyway, you charge it.

How long does a job take?

About 0.19 crew hours per outlet — one Melbourne operator prints one and a half to three hours for a house, which is the shortest reading of the four markets that have this product. A second system adds close to an hour, because the machine has to be moved and re-sealed.

Is the advertised hourly rate usable?

Not above its floor. One operator advertises A$50–A$100 an hour beside whole jobs of A$200–A$700 — three hours of the top of that band is A$300, which is the bottom of its own job range. This calculator prices from the outlet count and shows what the total implies per hour, so you can judge the two against each other.

What does the award say I have to pay?

Award MA000022 covers cleaning services. Level 1 is A$27.08 an hour for a permanent employee. No Australian source publishes what a duct technician is actually paid, so the calculator seeds a crew cost from two of those — a floor, which means your real cost is probably higher.

How often should ducts be cleaned?

Not on a fixed interval. The trade association does not recommend the three-to-five-year cycle it is often credited with. What is measured is the price effect: a long-neglected system runs up to 2.17 times a maintained one, and this calculator carries 35% for a visibly heavy one.