Plumbing Services List: 72 Services to Offer and How to Organize Them

A Customer rarely calls and asks for the exact service code in your price book.

They say the ceiling is wet, the toilet keeps running, the shower is cold, or the kitchen drain smells bad.

A good plumbing services list translates that problem into the right appointment. It also keeps the company from promising work that needs a different license, a larger crew, specialty equipment, or a site inspection.

This guide groups 72 plumbing service examples into eight practical categories. Use it to plan a website, phone script, online booking menu, price book, or technician skills matrix.

Pro tip from the author: “I write the public service name in the Customer’s language, then give the team a more detailed internal scope. The Customer needs clarity. The crew needs instructions.”

Quick Answer: What Services Do Plumbing Companies Offer?

Most plumbing companies build their menu from eight groups:

1. emergency and urgent response
2. leak detection and pipe repair
3. drain and sewer service
4. fixtures and appliance connections
5. water heating and water quality
6. installation and remodel work
7. commercial and specialty plumbing
8. preventive maintenance and inspections

The exact list depends on the company’s market and qualifications.

The U.S. Bureau of Labor Statistics describes plumbers as workers who install and repair water, gas, and other piping systems; install fixtures and appliances; clear drains; remove obstructions; replace broken pipes; and help maintain septic systems. Its plumber occupational profile also notes that most states and some localities require licensing.

That broad description does not mean every plumber or plumbing business can perform every service. Gas, medical gas, boilers, backflow testing, wells, septic systems, fire sprinklers, excavation, and other specialties may require separate credentials, permits, inspections, equipment, or insurance.

72 Plumbing Service Examples by Category

The chart shows how the examples in this guide are distributed. It is an editorial taxonomy, not a measure of market demand, revenue, or service popularity.

The same counts are listed below for accessibility.

Counts reflect the examples below. A business should publish only the services it can legally, safely, and profitably deliver.

Emergency and Urgent Plumbing Services

Emergency service needs a separate intake and dispatch process. The person answering the call should identify immediate hazards, tell the Customer when to contact emergency services or the utility, and avoid promising an arrival time the company cannot meet.

Eight common urgent service categories are:

1. Burst pipe isolation and repair. Locate or coordinate the shutoff, limit active water flow, assess damage, and repair or replace the failed section.
2. Active supply leak response. Address a leaking valve, connector, appliance line, fixture supply, or exposed pipe that is causing immediate damage.
3. Sewer backup response. Diagnose a blocked building drain or sewer connection and determine whether cleaning, inspection, repair, or municipal coordination is needed.
4. Overflowing toilet or drain response. Stop the overflow, protect the work area, clear the obstruction when appropriate, and identify a recurring or downstream problem.
5. Leaking water heater response. Identify whether the leak is from a connection, valve, drain, tank, or surrounding system and explain repair or replacement options.
6. Frozen pipe thawing and repair. Inspect accessible piping, manage thawing with appropriate methods, find splits, and reduce refreeze risk.
7. Sudden loss of water or pressure investigation. Check property-side valves, pressure controls, visible leaks, pumps, and whether the utility is involved.
8. Gas piping emergency coordination and repair where licensed. Follow local emergency and utility procedures, and dispatch only properly licensed and equipped personnel.

Do not label a service “24/7” unless someone can answer, qualify, dispatch, and support the call around the clock.

Leak Detection and Pipe Repair Services

Leaks range from an obvious drip to a concealed failure under a slab.

EPA WaterSense explains that leaks can result from old piping, worn fixtures, corrosion, freezing, irregular pressure, equipment problems, and improper installation. Its current leak detection and flow monitoring guide also describes moisture sensors and flow-monitoring devices that can alert a Customer to abnormal water use.

Twelve services in this category are:

1. Visible supply-line leak repair. Repair or replace an accessible leaking pipe, fitting, connector, or joint.
2. Concealed leak detection. Use inspection, isolation, acoustic, thermal, pressure, or other appropriate methods to narrow down a hidden leak.
3. Slab leak diagnostics. Investigate a suspected leak below a concrete slab and develop access, reroute, spot-repair, or replacement options.
4. Pipe spot repair. Replace a defined failed section after confirming the material, condition, access, and cause.
5. Partial or whole-property repiping. Replace aging, damaged, undersized, or unsuitable distribution piping based on a designed scope.
6. Main shutoff valve replacement. Replace a property shutoff that leaks, is seized, or no longer closes reliably.
7. Pressure-reducing valve service. Diagnose, adjust, repair, or replace pressure-control equipment when within the licensed scope.
8. Low or high water-pressure diagnostics. Measure pressure and flow, inspect controls and restrictions, and identify whether the cause is on the property or utility side.
9. Water-hammer troubleshooting. Identify sudden valve closure, pressure, support, pipe sizing, or appliance conditions that contribute to banging pipes.
10. Freeze protection and pipe insulation. Protect vulnerable piping and explain limits in severe weather or unconditioned areas.
11. Hose bib or outdoor faucet repair. Repair or replace leaking, damaged, or freeze-affected exterior connections.
12. Smart leak monitor and automatic shutoff installation. Install compatible monitoring or control equipment according to manufacturer and local requirements.

WaterSense’s home maintenance guidance gives Customers practical ways to check meters, compare water use, monitor fixtures, and test leak-detection devices. Link this resource in maintenance emails instead of turning every educational question into a sales claim.

Drain and Sewer Services

“A clogged drain” can describe a local fixture blockage, a building-drain restriction, a damaged sewer, or a municipal problem.

Ten drain and sewer services are:

1. Kitchen sink drain clearing. Clear a local kitchen blockage and inspect for grease, food, poor slope, or damaged piping.
2. Bathroom sink drain clearing. Remove common hair, soap, and local trap or branch-line obstructions.
3. Tub and shower drain clearing. Restore drainage and check the accessible waste, overflow, and trap connections.
4. Toilet blockage clearing. Remove an obstruction and identify recurring fixture or downstream problems.
5. Main sewer or building-drain clearing. Use equipment sized for the line and document whether roots, scale, damage, or recurring restriction is present.
6. Sewer camera inspection. Inspect accessible piping and provide video, location, observations, and limitations.
7. Hydro jetting. Clean suitable lines with water pressure after confirming pipe condition, access, containment, and equipment requirements.
8. Sewer spot repair. Excavate or access a defined failed area and replace or repair the damaged section.
9. Trenchless sewer lining or replacement. Evaluate whether lining, bursting, or another trenchless method fits the pipe material and condition.
10. Cleanout installation or repair. Add or restore accessible cleanout points subject to code, location, and permit requirements.

If excavation is possible, include utility-location, permit, surface restoration, spoil handling, and inspection steps in the scope. The federal Pipeline and Hazardous Materials Safety Administration reminds contractors and property owners to contact the state 811 center before digging.

Fixture and Appliance Plumbing Services

Fixture work is easy to describe but can expand when old shutoffs, drains, flanges, cabinets, electrical connections, or damaged surfaces appear.

Ten common services are:

1. Faucet repair or replacement. Diagnose cartridges, seals, aerators, connections, corrosion, or replacement needs.
2. Sink installation or replacement. Connect the fixture, drain, faucet, and supply while coordinating countertop or cabinet work.
3. Toilet repair. Service fill valves, flappers, seals, handles, bolts, supply lines, running, rocking, or flushing problems.
4. Toilet or bidet installation. Remove and install the fixture, confirm connection and clearance, and test operation.
5. Shower or tub valve service. Repair or replace cartridges, trims, balancing valves, diverters, and accessible valve bodies.
6. Garbage disposal installation or replacement. Address drain configuration, mounting, appliance connection, and applicable electrical coordination.
7. Dishwasher water and drain connection. Install or replace accessible supply and drain connections according to appliance and local requirements.
8. Refrigerator or ice-maker water line service. Install, repair, or replace a suitable small supply and shutoff.
9. Laundry box and washing-machine connection service. Repair valves, drains, boxes, hoses, and accessible connections.
10. Sump or sewage-ejector pump service. Inspect, repair, replace, and test the pump, controls, check valve, discharge, and alarm where applicable.

When a fixture is being replaced for efficiency, the EPA’s WaterSense Product Search lets Customers and Pros verify labeled toilets, faucets, showerheads, and other eligible products. WaterSense-labeled products are independently certified against the program’s efficiency and performance specifications.

Water Heating and Water Quality Services

Water heating combines plumbing with fuel, electrical, venting, condensate, drain, seismic, and code considerations that vary by equipment and location.

Eight service examples are:

1. Storage tank water heater repair. Diagnose controls, valves, elements, burners, venting, leaks, temperature, and recovery within the company’s licensed scope.
2. Storage tank water heater replacement. Size, remove, install, connect, permit, and commission the new unit.
3. Tankless water heater service or installation. Address sizing, flow, fuel or power, venting, condensate, water quality, isolation valves, and maintenance.
4. Heat pump water heater installation. Evaluate location, air volume, condensate, electrical capacity, noise, drainage, and operating conditions with the required trades.
5. Water heater flush and maintenance. Follow manufacturer instructions and document observed condition rather than promising a universal result.
6. Hot-water recirculation service. Install or repair pumps, controls, check valves, balancing, and return or crossover configurations.
7. Whole-home filtration or water-softener service. Test or review water conditions, size equipment, install treatment, and plan ongoing consumables or maintenance.
8. Point-of-use drinking-water or reverse-osmosis service. Install and maintain treatment equipment and its faucet, storage, drain, and filter connections.

The ENERGY STAR Product Finder lists certified water-heater categories and current models. Use manufacturer data, local code, utility requirements, and the Customer’s demand profile when building options.

Installation and Remodel Plumbing Services

Project work needs drawings, selections, allowances, trade coordination, inspections, and change control.

Ten installation and remodel services are:

1. New-construction plumbing rough-in. Install supply, drain, waste, vent, and required system components from approved plans.
2. New-construction plumbing trim-out. Set and connect fixtures and equipment after finishes are ready.
3. Bathroom remodel plumbing. Relocate or replace toilets, sinks, tubs, showers, valves, and associated piping.
4. Kitchen remodel plumbing. Coordinate sinks, faucets, disposals, dishwashers, refrigerators, filtration, and gas work where licensed.
5. Accessory dwelling unit or garage conversion plumbing. Extend and size systems for a new living or utility area subject to permits and capacity.
6. Fixture relocation. Move supply, drain, vent, and equipment connections for a new layout.
7. New water-service or distribution piping. Install or replace property-side supply and distribution systems.
8. New drain, waste, and vent piping. Add or replace sanitary piping based on load, slope, venting, access, and inspection requirements.
9. Outdoor kitchen plumbing. Provide approved water, drainage, winterization, and gas piping where qualified.
10. Utility sink or floor-drain installation. Add service fixtures or drainage in garages, shops, laundry rooms, or commercial support areas.

Do not quote a remodel from a fixture count alone. Confirm plans, demolition responsibility, finish repair, access, selections, permit owner, inspection schedule, and who coordinates other trades.

Commercial and Specialty Plumbing Services

Commercial work may involve larger systems, occupancy schedules, health requirements, shutdown coordination, documentation, and different billing terms.

Eight examples are:

1. Commercial restroom repair and upgrades. Service flush valves, carriers, faucets, drains, partitions coordination, and accessible fixtures.
2. Grease trap or interceptor service. Install, repair, or coordinate cleaning and compliance for food-service systems within local requirements.
3. Backflow prevention testing and repair. Test, document, repair, or replace assemblies only with the credentials required by the water authority.
4. Commercial water heater or boiler plumbing. Service or install equipment, storage, circulation, valves, and related piping with qualified trades.
5. Restaurant plumbing service. Support sinks, drains, dish equipment, grease systems, water heating, and scheduled shutdown work.
6. Tenant-improvement plumbing. Modify systems for a new office, retail, clinic, salon, or food-service layout from approved plans.
7. Multifamily and common-area service. Coordinate unit access, risers, common systems, shutoffs, restoration, and property-management communication.
8. Commercial preventive service agreements. Schedule inspections, drain maintenance, valve exercise, water-heater work, reporting, and priority response as defined.

Do not use “commercial plumbing” as one booking item. Divide it by building type, system, required skill, site restrictions, and whether a survey is needed before the Estimate.

Preventive Maintenance and Inspection Services

Maintenance creates value when it has a documented checklist and follow-up process.

Six examples are:

1. Whole-property plumbing inspection. Review visible fixtures, valves, piping, drains, water heating, pressure, and signs of leakage within a stated scope.
2. Seasonal freeze-preparation service. Inspect exposed piping, outdoor fixtures, insulation, shutoffs, and winterization needs.
3. Vacation or vacant-property plumbing setup. Shut down or monitor selected systems, document settings, and prepare a restart plan.
4. Fixture, shutoff, and connection maintenance. Exercise accessible valves, check supplies, inspect seals, and document deterioration.
5. Leak-detector and automatic-shutoff test. Test installed sensors, batteries, communications, valves, and manufacturer-required maintenance.
6. Plumbing maintenance plan visit. Deliver a defined combination of inspection, testing, cleaning, documentation, and priority scheduling.

If the company works on septic systems, treat that as a distinct qualified service line. EPA explains that septic systems are onsite wastewater treatment structures, and its septic care guidance recommends regular inspection and pumping schedules that depend on system type, household size, wastewater, and solids.

How to Decide Which Plumbing Services to Offer

A long list is not automatically a strong list.

Score each possible service against six questions.

1. Is the Company Properly Licensed?

Licensing varies by state and locality. The BLS profile notes that most states and some localities require plumbers to be licensed, but the exact levels and scopes differ.

Use the Department of Labor-sponsored CareerOneStop License Finder for discovery, then verify the current requirement with the responsible state board, city, county, water authority, or building department.

The SBA also explains that licenses and permits vary with activity and location, and specifically identifies plumbing as a commonly regulated local activity.

2. Does Insurance Cover the Work?

Ask the insurer about excavation, gas, boilers, water treatment, backflow, medical or process piping, subcontractors, water damage, environmental work, and the property types being served.

3. Does the Team Have the Skill and Equipment?

List the minimum qualification for each service.

Examples include journey or master license, backflow certification, manufacturer training, excavation experience, drain-camera operation, jetting procedures, combustion or electrical coordination, and confined-space or fall-protection training where applicable.

4. Can the Company Stock the Job?

A profitable flat-rate service can fail when the technician makes two supply-house trips.

Define the common parts, tool set, vehicle stock, supplier, special-order items, and restocking process.

5. Is There Profitable Local Demand?

Review calls and Estimates before buying equipment.

Track:

• requests received
• qualified opportunities
• Estimates sent
• jobs booked
• average Invoice
• crew-hours
• material cost
• callbacks
• gross profit
• repeat and referral work

6. Can Dispatch Send the Right Pro?

Tag each service with the required skill, duration, vehicle, equipment, helper, permit, and service area. Online booking should not create an unsafe or impossible promise.

Turn the Service List Into a Price Book

The public name should be clear. The internal item should be precise.

For every service, document:

Use the Workly plumbing pricing guide to build the underlying labor, overhead, material, risk, and margin calculations.

Write Customer-Friendly Service Pages

A service page should answer six questions quickly:

1. What problem does this service solve?
2. What is included?
3. What is not included?
4. What information should the Customer provide?
5. Is an on-site diagnostic needed before a final Estimate?
6. What is the next step?

Use phrases Customers recognize, such as “no hot water,” “slow drain,” or “leak under the sink,” while keeping the technical service code in the operating system.

Avoid thin pages that repeat the same paragraph with a different service name. Combine closely related jobs when the Customer intent and delivery workflow are the same.

Build an Intake Script for Each Category

Good intake protects the schedule.

Emergency Intake

Ask about active water, sewage, gas concerns, electrical exposure, property damage, shutoff status, occupants, access, utility involvement, and whether emergency services have been contacted when appropriate.

Drain Intake

Ask which fixtures are affected, whether water is rising, when the problem started, what has already been attempted, whether the property has a cleanout, and whether the issue has happened before.

Water Heater Intake

Ask for equipment type, fuel or power source, age if known, symptoms, leak location, model photos, error code, access, and whether any other fixtures have hot water.

Installation Intake

Ask whether the Customer has selected the product, who supplies it, dimensions, existing connection, finish work, permits, access, disposal, and other trades.

The intake script should qualify the visit, not coach an untrained person through hazardous work.

Package Services Without Hiding Scope

Packages can make choices easier.

Plumbing Health Check

• visible leak inspection
• pressure check
• accessible shutoff review
• toilet and faucet check
• water-heater visual review
• written observations

Drain Reliability Package

• defined drain cleaning
• camera inspection where appropriate
• cleanout and access review
• video or findings summary
• preventive recommendations

Water Protection Package

• visible connection inspection
• smart leak detector options
• automatic shutoff option
• Customer alert setup
• annual device test

State what is included, what requires a separate Estimate, and what the inspection cannot detect.

Connect Estimates, Scheduling, Invoices, and Reporting

The service list should follow the job from first contact to payment.

A practical workflow is:

1. select the Customer-facing service
2. collect the correct intake details and photos
3. assign a qualified Pro
4. diagnose and build options
5. send the Estimate
6. collect a signature or Deposit when needed
7. schedule the approved work
8. record labor, materials, photos, and changes
9. send the Invoice and collect payment
10. report revenue, gross profit, callbacks, and demand by service code

Workly can help a solo Pro or small team manage Estimates, Signed Estimates, Deposits, scheduling, Invoices, Tap to Pay, and Client Activity Alerts. It does not determine licensing, code, safety, or the technical scope of a plumbing service.

Services to Avoid Listing Too Broadly

”All Plumbing”

This can imply specialties the company does not hold or areas it cannot serve.

”Free Inspection”

Define the inspection. A quick visual check is not a full diagnostic, code inspection, sewer survey, water-quality test, or engineering assessment.

”Guaranteed Leak Detection”

Concealed systems can require staged testing, access, multiple methods, or other specialists. Explain the diagnostic process and limits.

”Any Drain, One Price”

Fixture clogs, main sewers, roots, collapsed pipe, access, line size, equipment, contamination, and restoration can create very different scopes.

”24/7 Emergency Service”

Publish it only when the company can deliver it consistently.

Specialty Credentials Without the Exact Scope

Name the credential and issuing authority accurately. Do not imply that a general plumbing license automatically includes every gas, backflow, boiler, medical, well, septic, or fire-protection service.

Plumbing Services List FAQ

What are the most common plumbing services?

Common categories include leak and pipe repair, drain clearing, toilets and faucets, water heaters, fixture installation, sewer diagnostics, emergency response, and preventive inspections. Local demand and licensing determine the final mix.

Should a plumbing website list every service?

List the services Customers need to identify the right next step. Group related tasks into clear pages and keep the full technical catalog inside the price book. Do not publish services the company cannot reliably deliver.

How should plumbing services be priced?

Use diagnostic, hourly, flat-rate, unit, or project pricing based on uncertainty and production data. Every price should recover loaded labor, materials, equipment, permits, travel, overhead, risk, and operating profit.

Which plumbing services need separate licenses?

Requirements depend on jurisdiction and scope. Gas piping, backflow testing, boilers, wells, septic systems, fire sprinklers, medical gas, contracting, and excavation may involve additional credentials or permits. Verify with the responsible state and local authorities.

How often should the service list be reviewed?

Review it at least when licensing, insurance, staff skills, equipment, supplier access, prices, or service area changes. Operationally, review demand, gross profit, and callbacks by service each month or quarter.

Can a solo plumber offer all 72 services?

The list is a planning library, not a target. A solo Pro may be more profitable with a focused set of services that fits the license, vehicle, tools, schedule, and local demand.

Build a Service Menu the Team Can Deliver

The strongest plumbing services list is not the longest one.

It helps the Customer recognize the problem, helps dispatch send the right person, gives the Pro a clear scope, and gives the owner useful pricing and profit data.

Start with the work the company already performs well. Define it. Price it. Train it. Track it. Add a new service only when the licensing, equipment, field process, and economics are ready.

When the service is defined, try Workly to carry it from Estimate and approval through scheduling, Invoice, and payment.